A price rises from $187 to $272. By what percentage did it increase? Most people reach for a calculator, type something plausible, and get it wrong — usually 31.25% or 45.45% rounded the wrong way. The right answer is 45.5%, and the reason most people miss it is a single quiet mistake: they divide by the wrong number.

The formula is short: percentage change = (New − Old) ÷ Old × 100. For 187 to 272, that is (272 − 187) ÷ 187 × 100 = 85 ÷ 187 × 100 = 45.45%, which rounds to 45.5%. The new value, 272, never goes in the denominator — the change is always measured against where you started. A free percentage increase calculator runs the same calculation instantly, and also handles decreases and reverse percentage problems.

The 3-Step Worked Example

  1. Find the change: 272 − 187 = 85.
  2. Divide by the old value: 85 ÷ 187 = 0.4545.
  3. Multiply by 100: 0.4545 × 100 = 45.45% → 45.5%.

That is the whole method, and it works for any two numbers. A salary that goes from $50,000 to $65,000 is (65,000 − 50,000) ÷ 50,000 × 100 = 30%. A shop price that rises from $200 to $230 is (230 − 200) ÷ 200 × 100 = 15%. The steps never change — only the numbers do.

The Mistake: Dividing by the New Value

The most common error is dividing the change by the new value instead of the old one. For 187 to 272, that gives 85 ÷ 272 = 31.25% — which is actually the answer to a different question: it is the percentage increase from 187 to 272 worked the wrong way round, and 31.25% is the percentage decrease from 272 back down to 187. Same two numbers, opposite direction, different answer. That asymmetry is the whole trap: 80 to 100 is a 25% increase, but 100 back to 80 is only a 20% decrease. Our full guide to percentage decrease examples shows seven worked cases where the direction changes everything.

Increase Is Not the Mirror of Decrease

Because the base changes, a rise and a fall of the same size do not cancel out. Raise $100 by 10% and you get $110; cut $110 by 10% and you land on $99, not $100. A stock that falls 50% needs a 100% rise just to get back to where it started. This is why investors, shopkeepers, and students all trip over the same arithmetic — the formula is easy, but the base keeps moving. The rule to remember: the percentage always belongs to the starting value, never the finishing one.

Reverse Percentage: Finding the Original

The same formula runs backwards. If a salary of $57,500 already includes a 15% raise, the original was $57,500 ÷ 1.15 = $50,000. If a $100 item is on sale after a 20% cut, its original price was $100 ÷ 0.80 = $125. Divide by (1 + rate) after an increase, or by (1 − rate) after a decrease — never just subtract the percentage from the final number.

The Bottom Line

187 to 272 is a 45.5% increase: change 85, divided by the old value 187, times 100. Divide by the old value, not the new one, and remember that a percentage rise and a percentage fall of the same size never cancel out. Check your own numbers with a free percentage increase calculator — it shows the formula, the steps, and the worked answer for increases, decreases, and reverse percentage problems.