Suppose the fill you want to learn starts at 1:12. The full mix tells you where the fill belongs, but the guitars cover the quiet snare notes. A useful practice setup has two files of exactly the same length. In one, you can hear the drummer alone. In the other, you play their part against the band. Here’s how to make both from a stereo recording you have permission to use.
Listen before you export
I work on VocalRemover’s Stem Splitter. Upload the recording and preview its four parts: vocals, drums, bass, and other. Solo the drums and listen to the fill. Can you hear the soft snare hits before the accent? Then mute the drums and listen again. A cymbal tail may still be audible in the guitars. For a practice track, what matters is whether you can hear your own timing against the bass.
Once you’re happy with the preview, unlock downloads and save the isolated drums as drums.wav. In the four-stem player, mute only the drums, leave the other three parts at their original levels, and export the custom WAV mix as backing.wav. Keep both exports at full length so their timestamps refer to the same performance.
Cut both files at the same boundaries
In this example the fill starts at 1:12. Start the loop two seconds earlier so you can hear the groove leading into it. From the folder containing both files, run this in Bash or zsh with FFmpeg installed:
for part in drums backing; do ffmpeg -i "${part}.wav" -ss 00:01:10 -t 8 \ -c:a pcm_s16le "${part}-loop.wav" done This writes two eight-second WAVs. Change the start and duration together for both files. For a loop you’ll repeat continuously, find two downbeats in the recording and use the interval between them as the duration. An arbitrary eight-second cut can drop you halfway through a beat on each repeat.
Slow down the same passage
for part in drums backing; do ffmpeg -i "${part}-loop.wav" -af "atempo=0.8" \ -c:a pcm_s16le "${part}-slow.wav" done At 80% tempo, that eight-second passage lasts about ten seconds and keeps its pitch. Learn the sticking from drums-slow.wav, then switch to backing-slow.wav and record yourself playing the fill. Listen for where your first kick after the fill lands against the bass. That gives you a specific timing cue to work on when you return to full speed.
