arXiv:2611.24392v1 Announce Type: cross Abstract: Accurate wall-heat-flux prediction in hypersonic flow depends on both the wall treatment and the available near-wall resolution. This work compares three complete implementations of a gas-kinetic scheme (GKS) for Mach~8.03 laminar flow over an isothermal circular cylinder: a linear Green--Gauss scheme (GG), a compact ghost-cell scheme (GC), and a pointwise one-sided compact scheme (POS). In POS, the stationary isothermal-wall conditions are imposed at the two Gaussian points used by the kinetic wall-flux quadrature. A reference mesh and six meshes in the uniform reduction (UR), log-layer unpacked (LLU), and log-layer packed (LLP) families are used to assess heat-flux sensitivity. At 24 digitized experimental angles, GG has the lowest root-mean-square difference on the reference, UR, and LLP families, whereas POS is closest on the two LLU meshes; GC is not the lowest-RMS scheme on any tested mesh. Hence no treatment is uniformly superior. On the present high-aspect-ratio cylinder grids, GG is the more robust choice except under LLU node redistribution, for which POS is preferable. Uniform reduction produces the largest heat-flux response for all three implementations. The comparison concerns complete schemes and does not isolate the pointwise constraints from differences in reconstruction and geometry representation.