A 10-metre-long, 3-metre-high wall needs 1,500 bricks. Not roughly 1,500 — exactly 1,500, before waste. Most people guess far fewer, because they forget the mortar joint: every brick in a finished wall is effectively bigger than the brick in your hand, and that joint eats area on every single course. Get the joint wrong and your order is wrong by hundreds of bricks.

Take the wall as it stands. It is 10 × 3 m, so its face area is 30 m². A Standard brick is 190 × 90 mm, but with a 10 mm mortar joint on each side its effective face is 200 × 100 mm — 0.02 m² per brick, joint included. Divide: 30 ÷ 0.02 = 1,500 bricks. That is the whole calculation, and it is the one a free brick calculator runs for any wall size, brick size, joint width, and waste percentage.

The Worked Example: 10 × 3 m, Step by Step

Step one, the wall area: 10 × 3 = 30 m². Step two, the brick's effective face: a 190 × 90 mm brick plus a 10 mm joint measures 200 × 100 mm, which is 0.20 × 0.10 = 0.02 m². Step three, divide: 30 ÷ 0.02 = 1,500 bricks. Step four, the part everyone skips — waste. Bricks break, get cut, and get rejected; add 5% and you order 1,500 × 1.05 = 1,575 bricks. Step five, the cost: at $0.50 a brick the wall itself costs 1,500 × $0.50 = $750, and the order with waste costs 1,575 × $0.50 = $787.50. If you want the cost worked out for your own wall, a brick wall cost calculator does the same arithmetic with your brick price and waste percentage.

Then the two numbers that decide the delivery. Mortar for this wall comes to 27.1 cubic feet (0.77 m³) — the volume of all those 10 mm joints added together, which is far more mortar than most first-time builders expect. And weight: a typical Standard brick weighs about 2.5 kg, so 1,500 bricks weigh 3,750 kg, or 3.75 tonnes — three pallets at 500 bricks per pallet. That is why the delivery truck matters as much as the brick count: you are ordering nearly four tonnes, not a boot-load.

Why the Mortar Joint Changes Everything

The joint is the trap. A bare 190 × 90 mm brick covers 0.0171 m², so dividing 30 m² by the bare brick gives about 1,754 bricks — 254 too many. The joint makes each brick cover more wall, so you need fewer bricks than the bare size suggests. The same logic runs the other way for small bricks: a Modular brick (194 × 57 mm) with a 10 mm joint has an effective face of 204 × 67 mm, or 0.013668 m². A 5 × 2.5 m garden wall is 12.5 m², so it needs 12.5 ÷ 0.013668 = 915 Modular bricks, and 960 once you add 5% waste. Smaller brick, more bricks — the calculator's brick-size modes (Standard, Modular, Queen, King, Utility) exist precisely because swapping the brick changes the count by hundreds.

Doors, Windows, and the Deduction Most People Forget

A wall with a door in it is not a 30 m² wall. Subtract every opening before you divide. A standard 0.9 × 2.1 m door is 1.89 m², and at 0.02 m² per Standard brick that is 1.89 ÷ 0.02 = 94.5 — about 95 fewer bricks. A window works the same way: measure its area, subtract it from the wall area, then divide. Skip this step on a wall with two windows and a door and you will have a pallet of bricks left over. Our guide to how many bricks do I need walks through deductions, waste percentages, and brick sizes with worked examples for each.

Three Mistakes That Wreck the Order

First, dividing by the bare brick size and ignoring the joint — that over-orders by about 17% on a Standard brick. Second, ordering exactly the calculated count with no waste allowance: cuts around openings and the odd broken brick mean a 1,500-brick wall ordered as 1,500 bricks runs short on the last course. Third, forgetting the mortar and the weight — 27.1 cubic feet of mortar and 3.75 tonnes of bricks need planning, not improvisation. And always check the result against a brick mortar calculator: the mortar volume scales with the joint width, so a 12 mm joint instead of 10 mm changes both the brick count and the mortar in opposite directions.

The Bottom Line

A 10 × 3 m wall is 30 m²; a Standard brick with its 10 mm joint covers 0.02 m²; 30 ÷ 0.02 = 1,500 bricks, 1,575 with 5% waste, $750 for the wall itself ($787.50 with waste), 27.1 cubic feet of mortar, 3.75 tonnes, 3 pallets. A 5 × 2.5 m garden wall in Modular bricks is 915 bricks, 960 with waste. Run your own wall — any length, height, thickness, brick size, joint, and waste — with a free brick calculator: enter the wall, subtract the openings, and it shows the brick count, mortar volume, cost, pallets, and weight, with the full working shown.