AI & ML
A Discrete Digital Isolator with Shielded Planar Transformer for Gate Driver Applications
arXiv cs.SY0 views
arXiv:2611.22520v1 Announce Type: new Abstract: Galvanically isolated gate drivers are required in many power electronics applications. This paper describes an implementation of a digital isolator using discrete components with a planar coreless PCB signal transformer providing the isolation. The use of an electrostatic shield between the transformer windings is shown to provide sufficient common-mode transient immunity to support IGBT half-bridge drivers, an application subject to a severe dV/dt transient during switching. The design is verified through the experimental implementation of a prototype half bridge using two of the proposed discrete digital isolators with SiC power transistors and demonstrates common-mode transient immunity greater than 15 kV/us with very low implementation complexity.
Source:https://arxiv.org/abs/2611.22520PreviousMARS: Feature-guided physics-informed deep learning for real-time battery health and lifetime predictionNextCycles of Arbitrary Period in Multidimensional Heterogeneous Hegselmann-Krause Dynamics
Related posts
Advancing chip design with OpenAI models
0OpenAI Blog
Vulcan failure caused by inadequate fuel supply to engines, ULA says
0Ars Technica
Sam Altman warns against a future where AI, not humans, calls the shots
0TechCrunch
Kumo Tabular: How NVIDIA Built a Foundation Model That Predicts on Any Table Without Training
0dev.to

Asus TUF Gaming F16 (2026), A15 & T700 Mini: Specs, Pricing & The ₹25,000 GPU Catch
0dev.to
I Stopped Chasing Every New AI Tool — And My Blog Finally Started Growing
0dev.to